Measure Shower Curtain Liner

Oct 17th

Shower curtain liner – A vinyl shower liner will do the hassle if all you want is something to keep water restricted when you take a shower. A regular liner, however, is not so attractive. Many shower drapes are on the market, some cost hundreds of dollars. If you are on a budget, making a shower drapery is a very simple project. When you measure a shower curtain, it helps if you already have shower curtain rings and a liner at hand.

Measure the width of the shower curtain liner. If you already have a liner and want the curtain the same width, use a tape measure to find the width fed. Otherwise, use a tape measure to find the length of the bathtub or shower curtain rod. Adjust the measured width depending on the style you want. Find the vertical length of the shower curtain. Begin by measuring from the bottom of a curtain ring on the shower curtain rod to the floor outside the bathtub. Subtract an inch from the measured distance so the curtain will not pull along the floor when you set it up. For example, if you measure 72 inches, subtract one for a vertical length of 71 inches.

Adjust the vertical length to allow for a peak limit. Add half an inch because the curtain will stretch slightly over the collars / holes for shower curtain liner. To provide sufficient strength, you must fold and sew in a 1-1 / 2 inch border at the top. Add 3 inches to allow for the extra material required.